Multi-arc ion coating method for vacuum coating equipment

  Multi-arc ion coating method for vacuum coating equipment

  1.Gloves

  The so-called vacuum coating equipment multi-arc ion coating is to place the material to be plated and the substrate to be plated in the room. The vacuum coating machine multi-arc ion coating uses a certain method to heat the material to be plated to evaporate or sublimate, and fly sputter to the surface of the substrate to be plated. The process of condensing into a film.

  The multi-arc ion coating method of vacuum coating equipment has many advantages in film formation under the conditions, which can reduce the collision of the atoms and molecules of the evaporation material on the molecules in the process of flying to the substrate, and reduce the interaction between the active molecules in the gas and the evaporation source material. Chemical reactions (such as oxidation, etc.), and reduce the amount of gas molecules entering the film as impurities during the film formation process, thereby providing the density, purity, deposition rate and adhesion of the film to the substrate.

Multi-arc ion coating method for vacuum coating equipment

  2.Vacuum glove box

  The multi-arc ion vacuum coating process of vacuum coating machine not only avoids the shortcomings of traditional surface treatment, but also has better technical indicators than traditional processes. It is widely used in hardware, machinery, chemicals, molds, electronics, instruments and other fields. Compared with the traditional treatment process, what are the technological innovations of the catalytic liquid?

  1) The vacuum coating machine does not require electricity for multi-arc ion coating, which reduces the cost. The cost is only one-half of multi-arc ion plating nickel, one-third of multi-arc ion plating chromium, and one-fourth of stainless steel. Repeated use has greatly reduced the cost.

  2) Multi-arc ion coating is easy to operate and simple in process. The metal substrate is immersed in the mixed liquid, "a bubble is ready", and it does not undergo any treatment when it needs to be reprocessed.

  3) The multi-arc ion coating of vacuum coating equipment is pollution-free, non-toxic, tasteless, and has no three wastes emissions. It is a national environmental product technology.

  4) Multi-arc ion coating by vacuum coating machine is easy to handle and easy to use; metal substrates with complex shapes can be processed.

  5) The hardness of the multi-arc ion plating film is large, the hardness is enhanced, and the hardness of the metal substrate soaked by the catalytic liquid is several times that of the multi-arc ion plating process.

  6) The multi-arc ion coating of the vacuum coating equipment will not rust, and the metal base parts soaked in the catalytic liquid have penetrated into the epidermis without peeling or falling off.

wdh-site

FOLLOW US

wdh-site wdh-site wdh-site
wdh-site

+86-13725889351

wdh-site

cassie@ysuymachine.com

Dongguan Yishuyuan Hardware Machinery Products Co., Ltd. Support By Hangzhou Great Master

qirui

Contact Us

Contact Us

qirui
Send