How to use the magnetron sputtering coating machine
When it is necessary to use the coating machine products, the magnetron sputtering coating machine has become a kind of equipment that every demander likes to use very much. Understand the steps in the use of this equipment, and some basic conditions involved in the use should be clarified, so that the effect of each part will be in a good state of composition.
In the process of mastering the magnetron sputtering coating machine products, the previous inspection work is very important. During the inspection, it should be noted that the liquid level of the water tank needs to be higher than the cooling pipe, and the indicator light needs to maintain a three-phase power configuration. After doing these various types of work, putting in samples has also become a very key internal component.
While understanding the above steps, what needs to be done next is the related steps of vacuuming and sputtering. After these two steps are completed, the operators can turn off the machine. However, when grasping each step, it should be better controlled in accordance with the internal sequence situation, so that the results obtained will be more satisfactory.
Therefore, in the process of using the magnetron sputtering coating machine, every step needs to be more carefully controlled. Only after paying attention to the details of each operation, the quality of the overall coating will be very high. It is hoped that in the process of dealing with the problem, the situation of the steps can be well controlled, so that high-quality coating results can be obtained.