How to use Evaporation Vacuum Coating Machine
About Evaporation Vacuum Coating Machine:
How to use Evaporation Vacuum Coating Machine? What problems should be paid attention to in use?
Evaporation Vacuum Coating Machine should pay attention to the effect of the product during use, and consider the speed of the motor or the tightness of the belt. There is a great correlation between the two. If the motor is running, the belt If it is loose, the speed of the motor may be slower, and the exhaust effect of the entire equipment will be much worse. Therefore, in this case, it must be maintained frequently. The Evaporation Vacuum Coating Machine must be well sealed during use. Only in this way can a better sealing effect be achieved. What should be paid attention to during the use of the product equipment?
1. Clean and dry: During the actual use of the Evaporation Vacuum Coating Machine, pay attention to the clean and dry surface, because this product and equipment itself has a lot of experience, so the oil of the entire product has a certain degree of sealing and lubrication. It is necessary to add various measures in accordance with the current standard regulations.
2. Regular oil replacement: When the Evaporation Vacuum Coating Machine is in use, some hydraulic oil on the surface should be replaced regularly, and the previous waste oil must be removed when replacing it. The cycle should be at least three months or about half a year, and it should be replaced according to the actual situation.
3. Close the intake valve first: When the Evaporation Vacuum Coating Machine is in use, before using it, it is best to close the intake valve first, then power off, and open all the air valves to release the atmosphere through the intake port. Among the equipment of the product.
The product equipment of Evaporation Vacuum Coating Machine still has many requirements in the working process. In fact, in addition to some of the above requirements, it is recommended that you should pay attention to the ambient temperature. Because it contains some oil inside, it is said that the ambient temperature cannot exceed 75 °C.
Where to buy Evaporation Vacuum Coating Machine:
Yishuyuan is one of the top Manufacturers that focuses on Evaporation Vacuum Coating Machine, Magnetron Sputtering Coating Machine, Multi-Arc Ion Coating Equipment. We focus on producing high-quality products with complete specifications. The quality of our products has passed international certification and the price is affordable.
Welcome to choose Yishuyuan - one of the top Manufacturers that focuses on Evaporation Vacuum Coating Machine, Magnetron Sputtering Coating Machine, Multi-Arc Ion Coating Equipment.
For more product information of vacuum coating machine, you can click on the relevant link below.